Description
UltraFluoride is our ceramic water filter plus fluoride and lead removal media with activated carbon for gravity water filter systems. Its combination of a microfilter ceramic outer, granular activated carbon, and heavy metal removal media effectively removes a range of contaminants, including fluoride, bacteria, chlorine, microplastics, trace organics, enhanced organics, pharmaceuticals, and heavy metals such as lead. In addition to working well with British Berkefeld gravity water filters, it’s also compatible with all other gravity-fed water filter systems on the market.
All IN ONE FILTER: Replaces both the Black Berkey filter and Berkey PF2 filter
FAQs
Does the Ultra Fluoride ceramic replacement cartridge fit in my Berkey?
Yes. The Ultra Fluoride ceramic replacement filter fits in the Travel, Big, Royal, Imperial and Crown Berkey. We recommend using 2 filters in your Travel Berkey, and 4 filters in your Big or Royal Berkey. Using 4 filters vs 2 will allow your system to filter your water twice as fast and the filters will last twice as long. You may use 6 in your Imperial and 8 in your Crown system.
Do the Ultra Fluoride ceramic filters need to be primed?
No. They do not require priming. Do not prime or they can crack.
NOTE: Run at least 5 full cycles of water through your filters to flush them out and achieve full filtration speed. Then wash and rinse your lower chamber and spigot before drinking the next cycle. Enjoy!
What contaminants are reduced by the Ultra Fluoride replacement gravity filters by British Berkefeld?
The Ultra Fluoride replacement gravity filters by British Berkefeld protect against fluoride, chlorine, lead, heavy metals, chemicals, pesticides, pharmaceuticals, microplastics, and bacteria.
How do British Berkefeld’s Ultra Fluoride ceramic filters compare to Berkey PF-2 fluoride reduction elements?
British Berkefeld’s solution for fluoride reduction is an all-in-one ceramic filter that installs in the upper chamber of a gravity filter system.
Berkey’s solution for fluoride reduction required purchasing a secondary set of specialty filters that hang in the water in the bottom chamber.
What is the filtration speed compared to the Black Berkey elements?
These are slower as the micro-pores are smaller. After 5 full cycles of water through your Berkey they will achieve their full speed of filtration which is about 1 liter per hour, per filter. That is why we recommend using 4 filters = 4 liters per hour.
How often should the Ultra Fluoride ceramic filters be replaced?
2 filters lifespan: 3000 Liters (800 Gallons). This is about 6 months if filtering 16 liters per day and 12 months if filtering 8 liters per day.
Can I use red food colouring to test ceramic gravity filters?
No.
Do the Ultra Fluoride filters also purify water?
Yes. British Berkefeld has specialized in and perfected the use of ceramic filters for water purification for almost 200 years. Purification refers to the removal of micro-organisms.
How long can I store unused ceramic filters?
As long as they have never been used, you can store unused ceramic Berkefeld filters indefinitely in a clean, dry location. Leave them in their original packaging and inside a ziplock bag.
How often should I clean my Ultra Fluoride ceramic filters?
Cleaning frequency will be determined by your local water conditions. As the white ceramic becomes increasingly discoloured, the flow rate through the filter will diminish. When the flow rate becomes annoyingly slow, remove the cartridges from the housing. Hold each one under cool running water and scrub the discolouration off the surface of the white ceramic. Use a scotch-brite pad or kitchen brush, something abrasive. Reinstall the cartridges and resume use. Enjoy!
